Broadcast Link 5GHz microwave audio-video link system - Broadcast Studio Transmitter Link

Broadcast Link 5GHz microwave audio-video link system
[5GHz-link]

EUR2.039,99 excl.BTW
EUR2.427,59 incl. BTW

Broadcast Link 5GHz microwave audio-video link system

Grotere afbeelding
(opent in nieuw venster)

5GHz Audio Video wireless link

Product Discription:

The Advantage of 5.8 GHz Is Clear! (a clearer picture that is!). 5.8 GHz systems offer much higher immunity to the interference found on older 2.4 GHz frequency video systems. The 2.4 GHz frequency band is now heavily populated by wireless Internet WiFi and Bluetooth devices not to mention interference from microwave ovens! Our 5.8 GHz systems also have an excellent bright color picture. Better than 2.4 GHz systems out there! Antennas are much smaller and offer higher gain or amplification than the same size at 2.4 GHz or lower frequencies.
Many customers are using our systems to link their TV studios to their distant transmitters!
They can also be used for radio stations, of course. In this case the free video channel can be used to remotely monitor various equipment or studio.

All of our transmitters and receivers are analog and not digital. This means real-time pictures and audio without lag or delay like many digital systems do.

What our complete system includes:
1x Receiver mounted in a NEMA 6 rated enclosure
1x Transmitter mounted in a NEMA 6 rated enclosure
2x 28dB gain Antennas with mounting brackets. (tripods or mast pipe not included)
2x 5m coaxial cable with N connectors
2x Power supplies to convert 110-240V AC to 15 volts DC
1x Installation manual
Expected range for this system is 10-20 kilometres. With dish antennas this can be extended further.

Technical Facts:

Input Voltage: DC 12-15V

Current Consumption: < 400mA

Output power @ connector: +30dBm

Modulation Type: FM

RF Deviation FM: 6.4MHz peak to peak

Channel Frequency:
- CH1 5733 MHz
- CH2 5752 MHz
- CH3 5771 MHz
- CH4 5790 MHz
- CH5 5809 MHz
- CH6 5828 MHz
- CH7 5847 MHz
- CH8 5866 MHz

Frequency Selection: Dip Switch

Frequency Stability: ±250KHz

Output Flatness: 0 ~ +3dB

Video Input Level 1V peak to peak

Impedance: 75ohms

Pre-Emphasis: NTSC & PAL

D.G. < ±8%

D.P. < ±8%

Audio Input Level: 2V peak to peak

Impedance 600 ohms

Audio Carrier Frequency CH1 - 6.0MHz ±25KHz

Audio Carrier Frequency CH2 - 6.5MHz ±25KHz

Audio Distortion 3% max. THD

Technical specifications for receiver:

Input Voltage: DC 12V ± 10 %
Current Consumption: < 220mA
Channel Frequency Matches Transmitter
Input Level @ connector: -25 ~ -80dBm
IF Frequency: 479.5MHz
IF Bandwidth 18MHz
Gain Flatness 3dB max
Noise Figure 2dB Typical
Input Return Loss 7dB Typical
LO. Drift ±250KHz
LO. Leakage -50dBm max.
Image Rejection 40dB
Output Level 1V ±0.15Vp-p Load
Impedance 75 ohms
De-Emphasis NTSC & PAL
D.G. < ±8%
D.P. < ±8%
Video S/N Ratio 38dB min.
Audio Output Level: 1.4Vp-p ±0.2
Impedance 600 ohms

Technical specifications for 5.8GHz gain grid antenna:

Due to rib construction of the reflector, it is resistant to even strong gusts of wind.

High gain of the antenna makes it a good tool for long-distance wireless links.

It may be used in horizontal or vertical polarization

Gain [dBi]: 28

Frequency Range [MHz]: 5400-5800

VSWR: 1.5

Polarization: Vertical. horizontal

Horizontal Beamwidth E [Deg]: 4

Vertical Beamwidth H [Deg]: 5

Front/Back Ratio [dB]: >25

Impedance [ohm]: 50

Connector: N female

Dimensions [cm]: 91 x 72

Bracket: Included, for 20-40 mm mast

Weight [kg]: 5

Levertijd:

5-10 werkdagen

Aantallen:

Klanten die dit artikel hebben gekocht, bestelden ook

SE5000 stereo FM encoder in 19" rack	TVMAX5050U+ 7W UHF TV Zender	Suono ESVA 50W FM Zender
LED LICHTKRANT PML-70COL	D&R AIRMATE USB 8 channel mixer mengtafel	MaxLink cable (6pin) 30cm for stereo encoder
Muurbeugel bevestiging (haaks) voor ON Air Light units	BNC-Male Soldeer connector. Clamp RG 58 (10 stuks)	SE 6000 FM stereo encoder DSP (voor inbouw FM Zender)