SE5000 stereo encoder in 19" rack with internal mains PSU - FM Zenders

SE5000 stereo encoder in 19" rack with internal mains PSU
[SE5000+ 19 i]

EUR411,05 excl.BTW
EUR489,15 incl. BTW

SE5000 stereo encoder in 19" rack with internal mains PSU

Grotere afbeelding
(opent in nieuw venster)

SE5000+ in 19" rack with internal mains PSU

Product Discription:

A solid performer, build in 19 inch rack with 7th order eliptical digital filter provides excellent attenuation above 15KHz (LPF, low pass filter) and a deep notch at 19KHz.

Exactly as specified by the standards. This unit is similar to the SE3000 AN+, but we took out the compressor and made it simpler and cheaper.

There are clippers at the input as well to take care of excessive peaks. A new encoder was born; a high performance stereo encoder with extremely elaborate filter circuitry.

We have to admit, this unit does sound extremely well and is sure to please many golden ears out there. To recapitulate, we have a built-in precise LED limiter and balanced inputs, sharp 19KHz stereo carrier notch filter (>60dB), pre-emphasis, excellent channel separation and sharp low pass filters all help to bring out really crisp sound. SE2000 AN+ can even be upgraded to RDS functionality simply by plugging-in a RDS daughter board. It is perfect for a demanding, but cost-conscious broadcaster.

Technical Facts:

Audio Response: 10Hz-15KHz, DSP filtered (Standards require upper level at 15KHz)

19KHz notch filter, >60 dB typ

Precise pre-emphasis, 50uS, 75uS or none

Audio Input Impedance: 10Kohm, balanced or unbalanced

Audio Input Level: 0 dB

Distortion: <0.1%

S/N ratio: >90 dB

Separation: >60 dB typ. (more than any radio receiver you can buy on the market)

Pilot Frequency: 19 KHz, DSP generated 32x oversampling

Output Impedance: 75 Ohms

Power Requirements: 12-15VDC / 100-150mA

PC Board Size: 100x85mm

Audio connectors: all RCA jacks are mounted on the board, 3-pin jumper for XLR balanced input, optional MCX or solder pads for MPX output

Power connector: 2.1mm power socket, center (+) and screw terminals (easier for boxed units)

Output level: Ueff 4V, 2V or 1V

Weight: 2Kg

Levertijd:

5-10 werkdagen

Aantallen: